CABINET SPEAKER

ASP7205-IP

HomeProductsDevicesPoE Active SpeakersCabinet Speaker

Meet the ASP7205-IP

The ASP7205-IP PoE Cabinet Speaker is the perfect internal speaker for applications such as public address, music streaming, pre-recorded message broadcast and scheduled announcements.

Wall mounted, the speaker can be easily installed in environments such as school corridors and classrooms, reception areas, office meeting rooms, shop floors and waiting rooms.

Available to Buy

See below for the headline features of the ASP7205-IP PoE Cabinet Speaker:

Native IP Device

Our speakers connect to your IP network. They’re simple to install and easily configured and managed with a web browser.

Power over Ethernet

IP speakers are powered and connected to the IP network with a single cable, making them easy to deploy and manage. The on-board audio amplifier is powered by IEEE802.3af or IEEE802.3at PoE depending on the power consumption.

Prioritised Audio

Our speakers support up to nine levels of announcement priority to make sure the most important announcements are always played.

Flex I/O

Each speaker features four Flex Inputs and four Flex Outputs. Each Flex I/O is configurable through the browser interface, providing flexible configuration options for attached I/O, such as playing a pre-recorded audio message, triggering an output or sending an IP event across the IP network.

Control

Use Netgenium PolicyServer or NGxControl PC software to add features such as public address, scheduled messaging and music streaming to your IP speaker installation. Click the links for more information on PolicyServer or NGxControl.

IP Integration

Netgenium IP speakers integrate with various CCTV VMS software, CCTV hardware, CCTV monitoring centre software and IP telephony systems. View our Integration section for more information.

Interoperability

You’ll find integration with Cisco Call Manager for Audio announcements using G.711 audio, and the ability to ‘pipe’ background music from a multicast audio source.

Tech Specs

Model No
ASP7205-IP

Connectivity
1 No. 10/100 Base TX Ethernet RJ45 Socket

Electrical
Effective frequency range, Hz (BSEN60268-5): 160 – 18,000
S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10 kHz S.P.L.: 96
@ Full power Octave Bandwidth, dB: 104
Acoustic Power (dB-PWL@1 watt) 1 k/2kHz, dB: 94/95
Dispersion at 1k/2k Hz, Degrees: 180/120
Directivity Axial Q factor, 1 k/2kHz: 3.6.5.8

Supported Codecs
G711 uLaw, G711 ALaw, PCM
Wav 11.025 Khz, Wav 22.05 Khz, Wav 44.1 Khz, Wav 48 Khz

Onboard I/O
No 4 Flex Inputs (Requires Digital 0v contact)
No 4 Flex Outputs (12V switched –ve)
Flex I/O can be used for local announcements, IP events and PolicyServer control

Power Supply
Power over Ethernet: IEEE820.3af
Max Power Output: 10W (with IEEE802.3af supply)

Mechanical
Dimensions: W x H x D (mm) 330 x 240 x 90
Net Weight: 1.15kg
Colour/Finish: White
Material: ABS moulding with UV inhibitors, steel mesh
Mounting: Keyhole and/or screws

Interested?

ASP7205-IP Datasheet   Available to Buy

Contact our sales team if you’re interested in our products or see where you can purchase them. Click the link above to download the information in a PDF datasheet. You can also print this page or share with somebody: