PROJECTOR SPEAKER
ASP7202-IP
Meet the ASP7202-IP
The ASP7202-IP PoE Projector Speaker is a very versatile, loud speaker. It is the ideal internal or external speaker for applications such as public address, music streaming, pre-recorded message broadcast and scheduled announcements.
Wall or pole mounted and offering high-quality audio, the Projector Speaker is the perfect solution for all indoor and outdoor scenarios, especially where great sound is required. The speaker also looks great installed outside residential properties.
See below for the headline features of the ASP7202-IP PoE Projector Speaker:
Native IP Device
Our speakers connect to your IP network. They’re simple to install and easily configured and managed with a web browser.
Power over Ethernet
IP speakers are powered and connected to the IP network with a single cable, making them easy to deploy and manage. The on-board audio amplifier is powered by IEEE802.3af or IEEE802.3at PoE depending on the power consumption.
Prioritised Audio
Our speakers support up to nine levels of announcement priority to make sure the most important announcements are always played.
Flex I/O
Each speaker features four Flex Inputs and four Flex Outputs. Each Flex I/O is configurable through the browser interface, providing flexible configuration options for attached I/O, such as playing a pre-recorded audio message, triggering an output or sending an IP event across the IP network.
Control
Use Netgenium PolicyServer or NGxControl PC software to add features such as public address, scheduled messaging and music streaming to your IP speaker installation. Click the links for more information on PolicyServer or NGxControl.
IP Integration
Netgenium IP speakers integrate with various CCTV VMS software, CCTV hardware, CCTV monitoring centre software and IP telephony systems. View our Integration section for more information.
Interoperability
You’ll find integration with Cisco Call Manager for Audio announcements using G.711 audio, and the ability to ‘pipe’ background music from a multicast audio source.
Tech Specs
Model No
ASP7202-IP
Connectivity
1 No. 10/100 Base TX Ethernet (replaceable integral 2.5mtr category 5e cable with RJ45 plug)
Electrical
Effective frequency range, Hz (BSEN60268-5) 110-18,000
S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10 kHz 91
S.P.L. @ Full power, Octave Bandwidth, dB 104
Acoustic Power (dB-PWL@1 watt) 1k/2kHz,dB 89/90
Dispersion at 1k/2k Hz, Degrees 180/120
Directivity Axial Q factor, 1k/2kHz 2.6/5.6
Supported Codecs
G711 uLaw, G711 ALaw, PCM
Wav 11.025 Khz, Wav 22.05 Khz, Wav 44.1 Khz, Wav 48 Khz
Onboard I/O
No 4 Flex Inputs (Requires Digital 0v contact)
No 4 Flex Outputs (12V switched –ve)
Flex I/O can be used for local announcements, IP events and PolicyServer control
Power Supply
Power over Ethernet: IEEE802.3af or IEEE820.3at
Max Power Output: 25W (with IEEE802.3at supply)
Mechanical
Dimensions (Front & Depth): 138mm x 204mm
Net weight: 1.1kg
Material: ABS plastic housing with UV inhibitors
Mounting: Stainless Steel U Bracket
IP Rating: 66
Interested?
ASP7202-IP Datasheet Available to Buy
Contact our sales team if you’re interested in our products or see where you can purchase them. Click the link above to download the information in a PDF datasheet. You can also print this page or share with somebody: