IP Lighting Controller

The Netgenium IP Lighting Controller is designed to leverage the management capability of existing ethernet network investments for the easy deployment of office lighting systems.

The Netgenium Lighting Controller is a progressive energy management tool that provides plug and play capability and easy reconfiguration of office lighting systems.

With a web management interface and easy to use 4 pole wieland connectors, the controller is easy to deploy and configure. Ongoing management is provided by the Netgenium Lighting Server.

Product Features

_______________________________________________________________________________

IP Building Management Systems

Today, many buildings are installed with multiple proprietary networks for operating the building automation systems and associated devices i.e. HVAC, Security & Access, Fire & Safety. As a result we see complex and expensive network management issues, high installation costs and limited automation functionality. This presents an enormous opportunity to streamline the process by using a single IP network onto which everything in the building is connected.

Netgenium products are native TCP/IP devices compliant with 802.3af inline power standards. Our vision is the convergence of the IT network and Building Management Systems onto a single IP environment. Our ethernet devices can be used to reduce the cost of deployment, ownership and management of systems throughout the entire building lifecycle.

_____________________________________________________________________________

Further information

System Description

Part: IP Lighting Controller ALC0808/IP

Eight port native IP Lighting Controller

Connectivity

10/100 Base TX Ethernet RJ45

8 No. Sensor Inputs ‘No Volt’ (each with 12VDC out) Digital

8 Analogue Inputs

Selective Triggering (open, close or state change)

Status Indicators

System RUN LED

Network LINK LED

Network TX/RX LED

Operating Modes

Netgenium Policy Server

Local Mode

HTTP Web Browser

Cisco IP Phones (XML)

Local Rule Base

Management

Web Browser

SNMP

Netgenium Policy Server

Controller Support

Netgenium Part: ALC0808/IP

Netgenium Part: ALC0808D/IP

Security Features

Password control

Secure Encryption

Failover modes for stand-alone operation

Network

Ethernet RJ45 10/100 Half/Full duplex

TCP/IP, ARP, DHCP

IPv4

Power

240VAC 50Hz (Loop In & Out)

Environment

Case dimensions cm 30h x 16w x 7d

Environment Temperature -5º C to +45º C

Humidity 0-95% rh non-condensing