Netgenium's Wiegand card readers incorporate HID's 13.5Mhz ICLASS smart card technology and support the ICLASS and MIFARE card formats
The readers are configured for optimal performance with the Netgenium ALK370x-IP family of lock controllers.
WGR3601-WR Features Include:-
- Read Range
iCLASS Card : Up to 3.25” (8.9 cm)
iCLASS Key/Tag : Up to 1.5” (3.8 cm)
Mifare / DESFire Card (CSN) : Up to 2.0” (5.1 cm)
- Mounting
The WGR3601-WR is ideally suited for mullion-mounted door installations, (Reader will not cover a single gang junction box).
- Dimensions
1.9” x 4.0” x 0.9”
4.8 cm x 10.3 cm x 2.3 cm
- Power Supply
12 VDC, from ALK370x-IP
- Current
55mA AVG, 116mA PEAK
- Operating Temp
-31º to 150º F (-35º to 65º C)
5% to 95% relative humidity non-condensing
Download the WGR3601-WR datasheet
The WGR3602-WR reader includes an integrated keypad enableing three levels of authentication at the door, PIN only, card only and two factor authentication (card and PIN required).
Features Include:-
- Read Range
iCLASS Card : Up to 3.25” (8.9 cm)
iCLASS Key/Tag : Up to 1.5” (3.8 cm)
Mifare / DESFire Card (CSN) : Up to 2.0” (5.1 cm)
- Mounting
A three-part reader makes installation easier. Mounting plate attaches to U.S./EU/Asian back box, 52-60 mm screw hole spacing (vertical or horizontal), or to any flat surface. Reader body fits onto mounting plate. Cover fits over reader body, secured with a screw. An auto-tuning circuit provides consistent read ranges on various mounting surfaces with minimal reduction on metal surfaces.
- Dimensions
3.3” x 4.8” x .95” (8.4 cm x 12.2 cm x 2.4 cm)
- Power Supply
12 VDC, from ALK370x-IP
- Current
55mA AVG, 116mA PEAK
- Operating Temp
-31º to 150º F (-35º to 65º C)
5% to 95% relative humidity non-condensing
Download the WGR3602-WR datasheet
WGR3604-WR readers are ideally suited to hotel and student accommodation where room occupancy is required before power is supplied, helping save energy, reduce cost and carbon footprint.
Features Include:-
- Read Range
iCLASS Card : Up to 3.25” (8.9 cm)
iCLASS Key/Tag : Up to 1.5” (3.8 cm)
Mifare / DESFire Card (CSN) : Up to 2.0” (5.1 cm)
- Mounting
A three-part reader makes installation easier.
Mounting plate attaches to U.S./EU/Asian back box, 52-60 mm screw hole spacing (vertical or horizontal), or to any flat surface. Reader body fits onto mounting plate. Cover fits over reader body, secured with a screw. An auto-tuning circuit provides consistent read ranges on various mounting surfaces with minimal reduction on metal surfaces.
- Dimensions
3.3” x 4.8” x .95” (8.4 cm x 12.2 cm x 2.4 cm)
- Power
12 VDC, from ALK370x-IP
- Current
55mA AVG, 141mA PEAK
- Operating Temp
-31º to 150º F (-35º to 65º C)
5% to 95% relative humidity non-condensing
Download the WGR3604-WR datasheet